InstrumEx Connector

Allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly.
Available with two insert options:the 4-way option will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC & 2.5A (DC1) 60V DC.
The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC & 0.5A (DC1)60V DC.
InstrumEx connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables Utskriftvennlig versjon

Ex protection	Flameproof Exd
Protection code	EX II2GD Exde IIC ExtD T85 A21
ATEX certificate	Baseefa06ATEX0061X
IECEx certificate	IECEx BAS06.0018X
Min. number of Pins:	1
Max. number of Pins:	8
Min. Conductor size:	0,14mm 2
Max. Conductor size:	2,5mm 2
Max. voltage:	250V
Rating voltage AC:	250C 4-way 60V 8-way
Voltage DC:	60V
Max. current:	10A
Frequency:	50/60 Hz
Live Demate:	Yes
Igress protection	IP66/IP67 Caps to be fitted to maintain IP ratings when the connector halves are separated.
Outer seal range:	5.5 to 12mm and 9.5 to 16mm
Armour/braid size:	0 to 1.25mm - 4-way 0.14 to 0.37mm² - 8-way
Keying position:	CP / CR - 5 flexible BR - 5 factory set
Ambient temp.:	-40°C to +60°C
Material	Nickel plated brass (standard) Stainless steel on request
Fuse rating 4-way:	10 A without thermal protection 20A gL with thermal protection
Fuse rating 8-way:	1 A max with / without thermal protection

Utskriftvennlig versjon